- New & Featured
Our site furnishings are designed for easy installation with minimal hassle.
Use the guidelines below to ensure a smooth setup.
PLEASE REVIEW BEFORE INSTALLATION
Before beginning installation, be sure to take a complete physical inventory of your shipment. Most of our products ship fully assembled and require only minimal steps to install. If your item is a welded bench or litter receptacle, it arrives ready for use and may simply need to be anchored in place.
Anchor tabs are pre-drilled with 5/8” holes to accommodate 1/2” anchor bolts. Anchoring hardware is NOT included, as installation surfaces can vary. For concrete applications, we recommend STAINLESS STEEL expansion bolts. Because our furnishings are installed in a wide range of environments—such as brick pavers, concrete, or terrazzo—we advise consulting with a qualified contractor or hardware supplier to select the appropriate fasteners for your site.
The information below outlines recommended anchoring hardware sizes and quantities.
Hardware Recommendations for Ground Anchoring
Stainless steel anchor bolts are recommended for all bench series. Specific quantities and sizes are listed below per bench style.
Augustine, Everett, Lamplighter, Robinson, Rosedale, and Schenley:
Quantity per: Four
Size: 3/8” diameter, no shorter than 6” in length
Torque
Quantity per: Four
Size: 1/2” diameter, no shorter than 5-7” in length
Carson:
Quantity per: Four (CSL4), Six (CS14, CS24, CSL6, CSL8), Eight (CS16, CS26), or Ten (CS18, CS28)
Size: 1/2” diameter, no shorter than 4” in length
ALL other benches:
Quantity per: Four
Size: 1/2” diameter, no shorter than 4” in length
Stainless steel anchor bolts are recommended for all litter receptacles. Leg style determines amount:
Elevated Legs
Quantity per: Four
Size: 1/2” diameter, no shorter than 4” in length
Adjustable Legs
Quantity per: Two (affixed through the two cross straps at the bottom of the unit)
Size: 1/2” diameter, no shorter than 4” in length
Stainless steel anchor bolts are recommended for all ash receptacles. Leg style determines amount:
Elevated Legs
Quantity per: Four
Size: 1/2” diameter, no shorter than 4” in length
Adjustable Legs
Quantity per: Two (affixed through the two cross straps at the bottom of the unit)
Size: 1/2” diameter, no shorter than 4” in length
With the exception of the Sonance bike racks, the following anchor bolts apply for all bike racks:
Quantity per: Four
Size: 1/2” diameter, no shorter than 4” in length
Sonance:
Quantity per: Six
Size: 3/8” diameter, no shorter than 4” in length
Stainless steel anchor bolts are recommended.
Including the Courtyard, Exeter, McConnell, and Reading chairs.
Quantity per: Four
Size: 1/2” diameter, no shorter than 4” in length
Stainless steel anchor bolts are recommended.
Quantity per: Four
Size: 1/2” diameter, no shorter than 4” in length
Stainless steel anchor bolts are recommended.
Most table sets require some assembly, with instructions provided separately. For designs that include baseplates on the chairs and table—such as the Artisan and Saxony sets—the information below outlines recommended hardware for ground anchoring. Stainless steel anchor bolts are recommended
Quantity per: Four per chair, Four per table base
Size: 1/2” diameter, no shorter than 4” in length
If your unit is for bury installation, you have received bolt on bury extensions. For these details, refer to the bolt on bury extension drawings and installation instructions.
